PAFL output to any mix bus

Forums Forums SQ Forums SQ feature suggestions PAFL output to any mix bus

This topic contains 24 replies, has 22 voices, and was last updated by Profile photo of Mfk0815 Mfk0815 11 months, 1 week ago.

Viewing 15 posts - 1 through 15 (of 25 total)
  • Author
    Posts
  • #69112
    Profile photo of Steveo
    Steveo
    Participant

    I would really love the option to output the PAFL to any physical output for use with studio monitors. I’m sure there are many others looking for this same thing.

    #69113
    Profile photo of jakethepeg
    jakethepeg
    Participant

    Yes!

    #69227
    Profile photo of Sayes1012
    Sayes1012
    Participant

    is it planned?

    #69515
    Profile photo of mixJM
    mixJM
    Participant

    PAFL to a physical output is planned – confirmed by A&H in YouTube comments under the video about PAFL.
    Routing PAFL to one of the mixes would be super awesome as this would help creating near field monitoring feed with PAFL and communication channels on one set of speakers.

    #69553
    Profile photo of Swell
    Swell
    Participant

    Confirmed A&H Team just implemented this feature in Firmware 1.2 See the Release Notes.

    V1.2.0
    Additional Features:
    D-Classic Automatic Mic Mixing added. Support for DX-Hub.
    ‘Chorus’ and ‘Noo Phaser’ FX units added. Assignable Channel Colours.
    Factory Processing Libraries added.
    Input to PAFL source point selection added.

    Attachments:
    You must be logged in to view attached files.
    #69557
    Profile photo of lightingman117
    lightingman117
    Participant

    That’s not the output port though. That is the ability to change pre-HPF or post delay or anywhere in between on the input channel strip.

    #69677
    Profile photo of HODDERMAN
    HODDERMAN
    Participant

    Please confirm. Is it going to happen. Control room PFL IS REQUIRED

    #69681
    Profile photo of Mfk0815
    Mfk0815
    Participant

    No, there is no possibility to route PAFL signals to outputs. It is only accessible via the Headphone output.

    #69683
    Profile photo of doctor_sound
    doctor_sound
    Participant

    pafl to output port is absolutly requied for monitor operations.

    The seperated wedge/IEM bus (featured in Dlive/GLD) would be a perfect addon for the SQ series.

    #71023
    Profile photo of Wim
    Wim
    Participant

    +1 for ability to patch PAFL to physical xlr/trs outputs

    #71573
    Profile photo of Danny-Lan
    Danny-Lan
    Participant

    I would really love the option to output the PAFL to any physical output for use with studio monitors. I’m sure there are many others looking for this same thing.
    +1 for ability to patch PAFL to physical xlr/trs outputs

    #71574
    Profile photo of Danny-Lan
    Danny-Lan
    Participant

    Please confirm. Is it going to happen. Control room PFL IS REQUIRED

    #71852
    Profile photo of MikeyMike
    MikeyMike
    Participant

    +1 for ability to patch PAFL to physical xlr/trs outputs

    #72605
    Profile photo of Tiph
    Tiph
    Participant

    Realy need this on working with a control room on live setup !
    Please !

    #72650
    Profile photo of Maxdrums
    Maxdrums
    Participant

    +1

Viewing 15 posts - 1 through 15 (of 25 total)

You must be logged in to reply to this topic.