PAFL Clear in DAW mode

Forums › Forums › SQ Forums › SQ feature suggestions › PAFL Clear in DAW mode

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of boogiemorten boogiemorten 3 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2020/12/28 at 1:58 pm #97705
    Profile photo of boogiemorten
    boogiemorten
    Participant

    I understand that PAFL Clear in the setup clears the PAFL audio bus in the mixer.
    My suggestion is to make a new tab in the DAW softKeys setup that allow to Clear all selected PAFL buttons that are active in DAW mode.
    Since the PAFL buttons on the mixer in DAW mode activates the PAFL in the DAW software via MiDI, there must be possible to just clear those same switches in DAW mode.
    Hope to see this in the next Fw update… 🙂

    2020/12/28 at 4:17 pm #97709
    Profile photo of SteffenR
    SteffenR
    Participant

    What is your DAW?

    2021/01/05 at 7:22 pm #97927
    Profile photo of boogiemorten
    boogiemorten
    Participant

    Hi SteffenR. I use Cubase 10 pro and Logic ProX.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.