Option to turn one EQ band on/off

Forums Forums SQ Forums SQ feature suggestions Option to turn one EQ band on/off

This topic contains 5 replies, has 6 voices, and was last updated by Profile photo of Valentyn L Valentyn L 3 years, 12 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #90098
    Profile photo of er1cnl
    er1cnl
    Participant

    you can already clear one EQ band at the time (in fact, this seems to be the only option to clear an EQ, you can’t clear the full EQ in one swoop?), so why not add the option to enable/disable one EQ band at a time?

    could be as simple as press and hold on the EQ band to turn it on/off

    #90233
    Profile photo of looloosha
    looloosha
    Participant

    Yes

    Sent from my iPhone using Tapatalk

    #90235
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi @er1cnl,

    It’s a neat suggestion for how to achieve it (by holding), but it would be useful to know more about the use case for needing to switch bands on and off rather than resetting them.

    Regarding clearing all EQ settings, this is done by holding the ‘Reset’ key and pressing the EQ ‘In’ key.

    Cheers,
    Keith.

    #90237
    Profile photo of RS
    RS
    Participant

    Hey Keith,
    I am a dLive user, but would like to see that option there, too!

    Usecase:
    – guitarist uses different guitars on the same channel. One guitar needs a 250Hz notch, the other doesn’t…

    regards
    Ralf

    #90325
    Profile photo of zeligonline
    zeligonline
    Participant

    Hi there.
    +1
    press/hold one band EQ button to switch it on/off.. could be useful latching behavior too..

    #90709
    Profile photo of Valentyn L
    Valentyn L
    Participant

    +1

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.