On button!!

Forums Forums Qu Forums Qu general discussions On button!!

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Andreas Andreas 4 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #55835
    Profile photo of Darkmutton
    Darkmutton
    Participant

    Hi all,

    I don’t know if it’s me just missing something, I’ve been using my QU-16 now for about a year but have never figured out what the little ‘on’ button does on the QU PAD, it’s the little button below the pan control on each channel. I’ve been assuming it turns that channel on or off in a mix but can’t find reference to it anywhere.

    #55836
    Profile photo of Lee7
    Lee7
    Participant

    Hi,

    It just turns ON the respective channels. That feature came in an earlier firmware update.

    🙂

    #55838
    Profile photo of J3phMP
    J3phMP
    Participant

    That “little” on button is important, because if it isn’t “ON”, your channel isn’t either! Had this happen while mixing on the board and couldn’t figure out why a channel wasn’t working. Never saw any reference on the QU itself that an “ON” switch on the IPad was off.

    #55839
    Profile photo of Andreas
    Andreas
    Moderator

    That “On” is called “Assign” on the desk. It controls if the particular channel is active on the currently selected mix.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.