Noise/hiss/ticks on one SQ5-input channel

Forums Forums SQ Forums SQ troubleshooting Noise/hiss/ticks on one SQ5-input channel

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Alex A&H Alex A&H 2 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #83225
    Profile photo of toonmeuris
    toonmeuris
    Participant

    Hi,

    This weekend I did a job om My SQ5. Sound check was ok. When the gig started I heard some periodically noise/ticks on the lead vocal (cabled SM58). During the break I changed everything (mic, cable, dx168 input channel). I did not change the channel on the SQ and the problem was still there.

    SQ5 with 2 x dx168, eurocable cat6 EtherCon 50m.

    Anyone else having this issue?

    Thanks

    #83227
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Toonmeuris,

    Do you know if the Audio clock source was set to Internal?

    If not, this may be the cause.

    Thanks!

    Alex

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.