No gain/trim control on qu24

Forums › Forums › Qu Forums › Qu troubleshooting › No gain/trim control on qu24

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Chris93 Chris93 8 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016/02/20 at 7:09 pm #54091
    Profile photo of Amanda
    Amanda
    Participant

    I have been using a qu-24 and AB168 (connected with dSNAKE) which has recently developed two problems – all signals coming to the qu24 are so low many do not register on the channel meter. The second problem is that changing the gain in Superstrip does not change the signal level of channels at all. Any ideas what can be causing this?

    2016/02/21 at 4:06 am #54099
    Profile photo of Chris93
    Chris93
    Participant

    Are you sure you’ve got the AB168 patched to your input channels? If those channels were showing signal from USB while no computer was playing audio it would explain your issues.

    Chris

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.