No Channel Metering on muted Channels

Forums › Forums › SQ Forums › SQ troubleshooting › No Channel Metering on muted Channels

Tagged: 

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of krylion krylion 5 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2018/10/27 at 9:09 am #79575
    Profile photo of krylion
    krylion
    Participant

    Hello dear AH-community,

    on my SQ5 (v1.3.0) I can’t see any signal meters on my stribes, while channels are muted. But I’d like to see, if there is a signal behind the mute or not. Even on the pad-app there are no signals shown in the meters while the channels are muted. So I have to hope, that everything will be alrigt, when I open the channel.

    Is there a function I’ve failed to see, or is it a bug?

    Greetings from Germany… krylion

    2018/10/28 at 8:35 am #79594
    Profile photo of krylion
    krylion
    Participant

    Hello again,

    Yesterday I found out that the AMM is the problem. Only muted channels put into AMM don‘t show level per led, if AMM is switched in. Pk is shown anyway.

    Greetings krylion

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.