No audio through ME-500.

Forums Forums ME Forums ME troubleshooting No audio through ME-500.

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of repickrel repickrel 5 years, 11 months ago.

Viewing 1 post (of 1 total)
  • Author
  • #72405
    Profile photo of repickrel

    We just picked up 4 ME-500 units. They are running off an old Aviom A-Net system. 3 of the 4 work flawlessy. However, the 4th isn’t sending audio through at all. The signal light shows on the ME-500 display when a channel mic is talked into, etc, and you can hear a hiss in the headphones when you crank the master volume up. So it says that the headphone amp is connected somewhat. However, there’s never any transmitted audio to the headphones. When another unit is hooked into that same power source and ethernet they work just fine. I’ve tried the factory reset but no success. Any help is greatly appreciated. Next step is to send it back to Sweetwater for a replacement.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.