Next Scene, midi, meters

Forums Forums SQ Forums SQ feature suggestions Next Scene, midi, meters

This topic contains 4 replies, has 2 voices, and was last updated by Profile photo of PBo67 PBo67 2 years, 4 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #80712
    Profile photo of PBo67
    PBo67
    Participant

    I don’t know if the following request s are coming into futur version, but in the 1.3.1, for me there are some easy missing functions.
    – scenes : because there is no next / previous/load physical buttons there must be possibilities to affect it to soft keys

    – meters, no screen with meters from the current strip setup.

    – more midi possibility, to control scene loading : load scene Nr xx

    – The mention Next scene on top of the screen is curious?

    – no expander possibilities

    Thanks

    #80841
    Profile photo of PBo67
    PBo67
    Participant

    I correct my previous message, about “scene”
    – I discovers that it is possible to affect the command “next previous and Go” scene on softkey (I hadn’t seen that we can scroll the menu).
    There is just missing all midi command for that.

    #80850
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi @pboeckel ,

    To change scene, send a bank change followed by a program change.

    i.e.
    Scene#3 – B0 00 00 | B0 20 00 | C0 02
    Scene#130 – B0 00 01 | B0 20 01 | C0 01

    Note that the scene being recalled must exist as a saved scene in the SQ, blank scenes cannot be recalled.

    ‘Next Scene’ shows the next scene that is ready to be recalled.

    Hope this helps!
    Keith.

    #80859
    Profile photo of PBo67
    PBo67
    Participant

    Hello Keith,

    I had the same answer last day from support, and try it today.
    We use QLAB to send the music and light over OSC, and it will have been great to be able to order also the SQ.
    But I did not found where I can put these string.
    I can do a lot of things over OSC message, but with midi message, it must be simple command.
    So if on a next version, we can add a midi message on each scene, and on each softly it would be great.

    Thanks.

    #80861
    Profile photo of PBo67
    PBo67
    Participant

    Hello Keith,

    Sorry for the noise…
    But finally,it works !
    I just forgot the “space” between hex caracters.

    for information for readers see attached screenshot :

    Attachments:
    You must be logged in to view attached files.
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.