new to dLive, a few questions!

Forums Forums dLive Forums dLive General Discussions new to dLive, a few questions!

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Runepune Runepune 4 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #88685
    Profile photo of Erik
    Erik
    Participant

    So after poking about for some time, I have a short list of questions – any advice or solutions appreciated!!

    1. When ST Linking input channels, the assign parameters reset (DCA, MUTE GRP, etc) Any idea why?

    2. Can mount inserts no problem, but how do you UNMOUNT or CHANGE a rack insert on a channel (or mix)?

    3. Make a soft key to sends on faders WITH PAFL active. Can get either/or on a key, but not BOTH.

    4. How to delete user profile and Admin Profile

    More to come, Im sure.
    TIA

    #88703
    Profile photo of Scott
    Scott
    Participant

    1. Not sure why
    2. On the channel’s insert tab page, click “unassign”. In the case of a rack effect, you can also achieve this from the effect slot’s rear panel settings, by assigning it somewhere else.
    3. Presently, I don’t think you can get both at the same time on a single user assignable button.
    4. You can deactivate user profiles. Rename them to use them for a different user in the future. The admin account cannot be deactivated.

    #88706
    Profile photo of Runepune
    Runepune
    Participant

    3. Make a soft key to sends on faders WITH PAFL active. Can get either/or on a key, but not BOTH.

    Use “Sel Mix PAFL Scene” as function for the button. In the “type” dropdown below, chose what to include.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.