Neutrik NA2-IO-DPRO

Forums Forums SQ Forums SQ feature suggestions Neutrik NA2-IO-DPRO

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 3 days, 8 hours ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #93256
    Profile photo of Showtime
    Showtime
    Participant

    Maybe an option for v1.6 or earlier, native control for the neutrik NA2-IO-DPRO interface.

    Would be best of both worlds.

    #93261
    Profile photo of SteffenR
    SteffenR
    Participant

    what do you want to control? my NA2-IO has no control I believe…
    never used it, since it came at the beginning of march 🙁

    #93269
    Profile photo of Søren Steinmetz
    Søren Steinmetz
    Participant

    The PRO has mic pre-amps, that can be controlled by Neutrik’s remote software gain/phantom wise.

    My guess is, an implementation of that will open a Pandoras box of wishes to control other Dante equipment as well.
    (like Yamaha’s RiO/TiO etc)

    #94023
    Profile photo of Showtime
    Showtime
    Participant

    The NA2-IO-DPRO has mic/line level, phantom power and analog/aes.

    I don’t think that a&h users will buy a yamaha rio/tio box, they will buy a dx168.

    Buy for a few input’s the neutrik is a great solution.

    #94029
    Profile photo of SteffenR
    SteffenR
    Participant

    I have a NA2-IO without the preamps in my toolbox…

    I don’t think that a&h users will buy a yamaha rio/tio box, they will buy a dx168.

    but if it’s present at the venue already, it could be nice to connect it to the system

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.