Multi Surface FOH / MON

Forums Forums dLive Forums dLive General Discussions Multi Surface FOH / MON

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 1 month ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #106924
    Profile photo of Soundcheckhi808
    Soundcheckhi808
    Participant

    I have 2- C3500 console 1- CDM64, 1-CDM32, 1-64×64 Dante card. Trying to do a FOH and MON setup splitting channels.
    Is there a this setup can be done. Or a gigaAce card will be needed?? GigaAce card is backed ordered 8-12 weeks

    #106930
    Profile photo of Brian
    Brian
    Participant

    You will need either a Gigaace card or a second Dante card (or two Waves or Madi cards). Gigaace is probably the preferrable option as it is cheaper, faster, and a full 128×128.

    #106931
    Profile photo of SteffenR
    SteffenR
    Participant

    TBH, with two mixracks, it is only a split, not multiple surface.
    Multiple surface means up to four surfaces with one mixrack.
    Every surface needs to connect via GigaACE.

    To do the split, you need a card in both systems that enables the audio split. Both cards need to use compatible protocols.

    @ejayala808 you require a second Dante card for the split.

    #106934
    Profile photo of Soundcheckhi808
    Soundcheckhi808
    Participant

    Brian,

    I do have a waves card, would running a waves and Dante card work?

    #106935
    Profile photo of Soundcheckhi808
    Soundcheckhi808
    Participant

    I do have 2 surfaces, both C3500.
    Also a waves card and a Dante would running a waves and Dante work ?

    #106938
    Profile photo of SteffenR
    SteffenR
    Participant

    I do have a waves card, would running a waves and Dante card work?

    No. They are not compatible at the moment.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.