Multi-Role V-Soundcheck

Forums › Forums › dLive Forums › dLive troubleshooting › Multi-Role V-Soundcheck

Tagged: , ,

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 5 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2018/04/28 at 7:43 pm #70674
    Profile photo of Dan
    Dan
    Participant

    Attempting to set up a monitor role. Running a 7000 at FoH and a DM64. We don’t have a 2nd surface for the monitors, but will be running them through a PC with Director. All is pretty much set up, but the question being is there anyway to make VSC work through the monitor split? VSC is set for channels 1-64, but the channels for the monitors are patched from 85-128. Being that the split is just a soft patch, you’d think there’d be some way to make it work.

    2018/05/06 at 7:41 pm #70847
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Nah, just a manual patch. Just drag first 64 and then same again.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.