Moving channels

Forums › Forums › iLive Forums › iLive general discussions › Moving channels

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2014/05/24 at 7:11 pm #39895
    Profile photo of ddff_lvddff_lv
    Participant

    Hi,

    I’m in situation when I have to move the channels – not only sockets, but insert channel 17 between 3 and 4 so it is there in default MixPad channel order. I know I can copy channel processing and routing from existing channels and paste them to new channels. In my case that would mean I’d have to copy CH30 to CH31 and so on until my channels 4 and 5 are equal so I can paste the 17 to 4. I guess there is no shorter way? Is there something that will not be pasted? Like gain, polatity, pad, phantom or maybe routing to aux chains? What about scenes, will they work as before or their parameters are absolute to CH numbers?

    ddff

    2014/05/27 at 4:48 pm #39950
    Profile photo of Chris93Chris93
    Participant

    Does the mixpad layout follow the surface strip assign?

    Chris

    2014/05/27 at 9:21 pm #39960
    Profile photo of ddff_lvddff_lv
    Participant

    Unfortunately it does not. It would be too simply if it would. I can define custom layers in Mixpad, but in my application it’s more convenient to switch between IP layer and custom-1 rather than scroll left and right.

    ddff

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.