More EQ control on soft rotaries

Forums Forums SQ Forums SQ feature suggestions More EQ control on soft rotaries

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Yann Yann 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #97336
    Profile photo of Yann
    Yann
    Participant

    There is currently only control over the width as far as I can see on the soft rotaries. It would be brilliant if we could also get Frequency and Gain control options too! The feedback on the screen would also show the current freq or +-DB.

    This would allow a nicer 2 handed control over EQ with less need to be looking at the screen or even going into the EQ window. We could for example see our 4 frequencies on the rotary LCDs and select the band and control gain to taste on the dedicated EQ controls.

    #100824
    Profile photo of ioTon
    ioTon
    Participant

    +1
    + Midi Control of the soft rotaries
    + soft rotary setup via app

    #100825
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    When an EQ band is assigned to a Soft Rotary, the associated key (below) is used to cycle through Gain/Width/Frequency and the colour of the rotary will also change to Red/Amber/Green to show this.
    Or is the suggestion for these to be separated out?

    Thanks,
    Keith.

    #100977
    Profile photo of Yann
    Yann
    Participant

    Oh! nope, I’ll shut up now 😀

    Thanks that was the fastest feature suggestion addition to the desk ever! haha

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.