Topic: Mono Matrix option | Allen & Heath Digital Community

Mono Matrix option

This topic contains 54 replies, has 41 voices, and was last updated by LouGees 4 years, 3 months ago.

Viewing 10 posts - 46 through 55 (of 55 total)

← 1 … 3 4

Author

Posts
2019/04/28 at 7:13 pm #83589

Fotgar
Participant

+1

2019/05/10 at 9:53 am #83762

Joseph
Participant

Mono Matrix outs will help us to send LR sum to different delay locations (more than 3).
Please consider this on high priority.

2019/06/17 at 6:27 pm #84649

Blender
Participant

Agreed. This would be very useful.

2019/06/19 at 8:20 am #84698

jc2000
Participant

+1

2019/06/20 at 8:12 am #84719

Alex A&H
Keymaster

Hi All,

This is included in version 1.4 of the SQ firmware, so please download it (if you haven’t already) and you can find the setting in Setup > Mixer Config > Mix Stereo.

Thanks!
Alex

2019/07/12 at 9:49 am #85133

Andrew
Participant

Hi Alex

I haven’t updated our consoles yet, but looking at the 1.4.0 reference guide, it’s still only three matrices in mono, not three stereo matrices or six mono matrices?

Ta,

Andrew

2019/07/12 at 10:47 am #85135

Alex A&H
Keymaster

Hi Andrew,

This is correct.

The matrices follow the same design as the 12 configurable mix buses, so they can be used in either mono or stereo mode.

Thanks!
Alex

2019/12/05 at 6:16 pm #88103

main
Participant

The fact that there are only 3 Matrices is absurd.

2019/12/30 at 8:33 pm #88475

KilianB
Participant

I agree. Please give us more Matrices… I feel like six would be fine!

2020/01/07 at 11:57 pm #88614

LouGees
Participant

I like this option I agree +10000000
Author

Posts

Viewing 10 posts - 46 through 55 (of 55 total)

← 1 … 3 4

You must be logged in to reply to this topic.