Mono Matrix option

Forums Forums SQ Forums SQ feature suggestions Mono Matrix option

This topic contains 35 replies, has 27 voices, and was last updated by Profile photo of Martijn Martijn 3 weeks, 2 days ago.

Viewing 15 posts - 1 through 15 (of 36 total)
  • Author
    Posts
  • #69571
    Profile photo of Mac
    Mac
    Participant

    Would LOVE to be able to unlink the matrix’s for zone control along with being able to adjust their send levels from the iPad app!

    #69760
    Profile photo of Brandon
    Brandon
    Participant

    100% agree… especially when doing mono setup and multiple delays, having un summed signals gives greater output and also would give you 6 matrixes instead of 3! competitive to the x/m 32.

    #70036
    Profile photo of artos
    artos
    Participant

    absolutely agree. this is trivial

    #70159
    Profile photo of mooncalf1979
    mooncalf1979
    Participant

    Me too! Urgent to solve! Delaylines, Frontfills, Broadcastfeeds,… have often to be a monosum!!!!

    #70179
    Profile photo of TonmeisterDaniel
    TonmeisterDaniel
    Participant

    +1 for mono matrix option

    #70201
    Profile photo of Dan
    Dan
    Participant

    Just came across this issue and I support there mono matrix option.

    #70933
    Profile photo of stanislawdem
    stanislawdem
    Participant

    +1 for mono mtx

    #71019
    Profile photo of Wim
    Wim
    Participant

    +1 Mono matrix

    #71140
    Profile photo of j4k3st4ff
    j4k3st4ff
    Participant

    +1 for mono matrix. Came on here specifically to suggest this. Would rather have 6 monos that I can link than 3 stereos I cant unlink.

    #71571
    Profile photo of Danny-Lan
    Danny-Lan
    Participant

    +1 for mono matrix. Came on here specifically to suggest this. Would rather have 6 monos that I can link than 3 stereos I cant unlink.

    #71589
    Profile photo of Jens-Droessler
    Jens-Droessler
    Participant

    And while you’re at it, make the stereo aux be splittable to two mono aux as well.

    #71595
    Profile photo of Andrew
    Andrew
    Participant

    +1 for mono matrix. Had the SQ5 and SQ6 for four days, and currently on our first job with the SQ5, and the biggest problem I have with it is the three stereo matrices. If we could split them to six mono matrix sends, we could have proper zone control and delays. Currently doing it using aux sends, but eats them up and it isn’t pretty

    #71609
    Profile photo of Lino
    Lino
    Participant

    +1 for mono matrix – obviously!

    #71616
    Profile photo of Yann
    Yann
    Participant

    +1 absolutely. Switchable between mono/stereo just like the auxs.

    But also… can’t there just be more? Aren’t they all software (no buttons) so there could be more than just the 6 mono/3 stereo. Please correct me if I’m wrong!

    My plan is:
    Stereo delay 1
    Stereo delay 2
    Mono subs
    Mono dsp’d centre sub (cardiod config)
    Mono Balcony fill
    2-3x Mono seperate room sends

    This could all be done with ouboard and split mixers but would be nice if the mixer could handle all.

    #72392
    Profile photo of aisle-6
    aisle-6
    Participant

    Yes please.

Viewing 15 posts - 1 through 15 (of 36 total)

You must be logged in to reply to this topic.