Mono Master Meter as Masterbus gain reduction meter

[Bob BriessinckParticipant]

Hi all,

How about the possibility to have the mono master bus LEDs show the gain reduction of the master bus compressor? Of course, there is no dB scale shown but there isn’t any shown on the LEDs near the faders either.
Maybe have each LED show 1dB of reduction, maybe 0.5dB of reduction for more accuracy. Maybe even make it possible that it follows channel select so you have a more accurate gain reduction shown when selected rather than having to open the Comp screen or to have to interpret the GR shown by the few LEDs near the faders..

Just an idea. 🙂

[DaveParticipant]

That’s not a bad idea… doesn’t affect me since I’m running a LR+M PA, but it sure sounds useful for people who aren’t using a mono bus (or who don’t need to see its output meter).

[Author]

Posts