Monitor Mixes and SQ4U

Forums Forums SQ Forums SQ general discussions Monitor Mixes and SQ4U

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of fbcleb fbcleb 9 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #93667
    Profile photo of fbcleb
    fbcleb
    Participant

    Setting up SQ7 for a band. Band will use SQ4U to access 8 in ear mixes via mixes 1-8. I need an additional couple of wedge mixes for singers. I’m not seeing a way to make the Groups a pre-fader send or switch a couple of fx sends to pre-fade. Any suggestions?

    #93668
    Profile photo of fbcleb
    fbcleb
    Participant

    Aaaaand I found where to make the effect sends pre-fade.

    #93669
    Profile photo of Chris34
    Chris34
    Participant

    Correct me if I’m wrong, but when you say ‘the groups’, it sounds like you assume that you must use those groups for additional monitoring, but you can easily change those groups into extra mixes, just like mix 1-8. You can do this by going to ‘mixer configuration’ in the setup menu, and selection the number of aux mixes you want. 8 aux mixes means 4 groups, 10 aux mixes means 2 groups, etc.

    #93670
    Profile photo of fbcleb
    fbcleb
    Participant

    Thanks Chris!!! I missed that page.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.