Monitor mixer on PL-10

Forums › Forums › iLive Forums › iLive general discussions › Monitor mixer on PL-10

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016/04/29 at 8:28 pm #55348
    Profile photo of ddff_lvddff_lv
    Participant

    So I want to give the band on the stage some control over their IEM mixes. I could use a bunch of ME-1, of course, but this would be to complicated and too big for transporting.
    So I thought I could use top 8 buttons for mix select and the bottom 8 for PL related scenes recall to change rotaries assignment. Did not find a function “mix select” in PL config window. Any workaround? Maybe a MIDI string?

    ddff

    2016/05/02 at 4:49 pm #55413
    Profile photo of ddff_lvddff_lv
    Participant

    Ok, I’ve solved this by making 5 scenes for each member, that gives access to 40 channels. Scene contains only PL configuration. Ended up with 50 scenes 🙂

    ddff

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.