MixPad Not Controlling FX Send, Aux, or Grp Faders

Forums Forums SQ Forums SQ troubleshooting MixPad Not Controlling FX Send, Aux, or Grp Faders

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Bob Bob 3 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #68234
    Profile photo of Bob
    Bob
    Participant

    The MixPad app (iPad & Android) does not produce fader movement on the console when controlling the FX Send, Aux or Grp mixes.

    The levels will change correctly, but the faders on the console do not move.

    However, moving the faders on the console will move them correctly on the app.

    ??

    #68244
    Profile photo of MarkPAman
    MarkPAman
    Participant

    You will only see fader movement if you’ve selected the FX send, Aux or Grp, as appropriate, on the mixer. Selecting these on the iPad does not change what’s selected on the desk.

    Similarly, if you’re looking at the main mix on an iPad (or any other view that’s not what the desk is currently showing), you’ll not see faders move for any of these levels as change them on the desk.

    This allows (or more) two operators to use the desk at he same time without disrupting each others workflow.

    #68250
    Profile photo of Bob
    Bob
    Participant

    Hi Mark and thanks for your response. Is yours working correctly ?

    Unfortunately, my MixPad app won’t move the master fader … even when the FX Send, Aux, or Grp button is selected on the console.

    However, the input faders move correctly when selecting how much of a particular input goes to one of those sends.

    The Mutes also function correctly.

    The app also correctly moves the master fader for the Main LR.

    It’s just the master fader for any of those sends that will not move.

    Arrrrrr …..

    #68902
    Profile photo of Bob
    Bob
    Participant

    Any progress with updating the MixPad App so that the FX, Aux, and Grp master faders move when controlled by the app ?

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.