Midi Scene Recall -> Go function

Forums Forums dLive Forums dLive General Discussions Midi Scene Recall -> Go function

Tagged: ,

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of ThatComplicatedMidiGuy ThatComplicatedMidiGuy 6 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #83771
    Profile photo of Stanny
    Stanny
    Participant

    Hi all,

    is there a known program change to trigger the “Go” function in scenes rather than a specific scene recall?
    Currently when I recall a specific scene, the recall completes but doesn’t change the current or last recalled scene…

    e.g.: Scene 1 is active, I recall scene 2 by midi and would like to recall scene 3 manually again,
    the current scene will be scene 1 and I would trigger 2…
    Having a midi program change linking the “Go” function would solve this…

    Or am I doing something wrong?
    My midi to recall a specific scene: BB 00 00 CB 03

    Thanks a million!
    Stijn

    #83775
    Profile photo of RayS
    RayS
    Participant

    Hi, in the scene setup try selecting auto increment…and see if that helps.

    Ray

    #83778
    Profile photo of Stanny
    Stanny
    Participant

    Great thinking Ray, but unfortunately that doesn’t do the trick.
    (I have it enabled by default actually :))

    #83784

    Alas, this is *also* not currently in the midi spec. (Pan is also missing, boooooooo.) One workaround you could do is use something like live professor’s cue lists, map dLive scenes to cues, then map next/previous/go out to whatever controller you’re trying to map for this function. I’m doing this with an ElGato Stream deck, which seems to be working quite smoothly.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.