Hi all,
-SQ7 firmware 1.5.1
-Logic X 10.6.2
-DAW Control 1.71, SQ Mixer, MIDI channel 2, Mackie Control (Standard), Midi Ports SQ Midi Out and In
When moving two or more midi faders on the SQ, it makes the 14th fader to the right jump to random places.
For example,
I move SQ Midi Fader 1 and 2 at the same time, which corresponds to Kick in and Kick out in Logic. This will make SQ MIDI Fader 15 and 16 jump, which in logic, is a percussion channel and bass channel.
IN Logic, you can hide channels, so, I hide some channels.
Now, Moving SQ Midi Fader 1 and 2 at the same time will still make SQ Midi Fader 15 and 16 jump, even though it corresponds to a different channel in logic, i.e. an acoustic or bus.
Scenario will be the same if I use MIDI Fader 2 and 3, or 3 and 4. It will affect Midi Fader 16 and 17, or 17 and 18. It will always be offset by 14.
How do I stop this?
