Microphone in aux send even when it’s off

Forums › Forums › SQ Forums › SQ troubleshooting › Microphone in aux send even when it’s off

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Alex A&H Alex A&H 5 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/04/26 at 4:02 am #83537
    Profile photo of jordanshaft
    jordanshaft
    Participant

    My vocal channel is in the left side of my in ear mix even when I take it out or mute it. The same with the second vocal mix except it’s in my right side. I even unpatched it from the board and it was still in my mix. It’s not coming thru any other channels and it’s not doing it in any other mixes. The mic is patched directly to channel 1 on the console and my mix is outputs 1/2. Anyone have any thoughts??

    2019/04/26 at 8:10 am #83539
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Jordan,

    If you press the Sel key of the mix and then the Processing key, can you make sure the Mix External In Source Select is set to Unassigned?

    Thanks!

    Alex

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.