ME Protocol

Forums › Forums › ME Forums › ME general discussions › ME Protocol

Tagged: ,

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 10 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/11/05 at 11:02 pm #35861
    Profile photo of millst
    millst
    Participant

    Ok, so I’m just investigating running ME traffic over differen mediums (Fiber, Wifi, backbones etc).
    My question is..

    Dante into MEU
    Then ME1’s plugged into the MEU.
    What layer is the traffic to the ME1’s running on?
    Is it at the IP layer and is it routable?

    Is it converted into dSnake or ACE or Aviom to the ME1 in this scenario?

    2013/11/06 at 12:16 am #35866
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Millst,

    ME-U outputs are always going to be dSNAKE and therefore Layer 2 Ethernet compliant.
    All usual recommendations for dSNAKE / ACE apply when using third party devices such as a switch or medium converter.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.