ME 500 is Post Fader from my Qu 32

Forums › Forums › Qu Forums › Qu troubleshooting › ME 500 is Post Fader from my Qu 32

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Alex A&H Alex A&H 4 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/09/13 at 7:14 pm #86375
    Profile photo of Eric
    Eric
    Participant

    Greetings, We just installed a Qu 32 in one of our rooms and we are using the ME 500’s. Our other rooms have the GLD 80’s and ME 1’s. Last night during rehearsal the ME 500’s were receiving a post fader mix from the Qu 32. I cannot figure out how to change that to a pre fader mix. It’s easy on the GLD series but I cannot find out how to do it on the Qu series. Please help.

    2019/09/15 at 5:55 pm #86441
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Eric,

    The Qu’s feed the ME system with the direct outputs, so you must change the direct output settings to not follow the fader.

    You can access these settings by pressing the Sel key of an input channel, then press the Routing key.

    Thanks!
    Alex

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.