Matrix & Shure Axient Support

Forums › Forums › Avantis Forums › Avantis General Discussions › Matrix & Shure Axient Support

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/10/07 at 4:50 pm #86881
    Profile photo of EuropeEurope
    Participant

    Hello,
    Great looking desk.
    Can you advise how the busses work. Are they all stereo or can they be split into two mono busses. Also how many matrix busses are there?
    And finally any support planned for Shure Axient gain / remote monitoring? It’s missed on the SQ also!
    Thanks.

    2019/10/07 at 6:56 pm #86885
    Profile photo of Nicola A&HNicola A&H
    Keymaster

    The bus architecture is configurable, like dLive. This means you can configure your Show file with any combination of up to 42 busses including Aux, Group, Matrix, Main, FX Send and PFL. Stereos count as two busses.
    So for example, a Monitor show could be set to use 10 Mono Aux + 10 St Aux + 10 FX Send + PAFL.
    A FoH show could be set to use 5 St Aux + 5 St Group + 5 St Matrix + 8 FX Send + Main LR + PAFL.

    As for Shure support, this is not planned for V1.0. It will be discussed later.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.