Matrix expand on 6

Forums Forums SQ Forums SQ feature suggestions Matrix expand on 6

Tagged: 

This topic contains 7 replies, has 8 voices, and was last updated by Profile photo of paullorenz paullorenz 4 years, 4 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #87085
    Profile photo of Twixx
    Twixx
    Participant

    I often need to have more Matrix outputs available for delaylines etc. Would be nice to get more than 3 eg. 6

    #87089
    Profile photo of JohnOC
    JohnOC
    Participant

    +1

    Going to start using them in preference to groups for some functions but could do with another 3

    #87124
    Profile photo of OrionX
    OrionX
    Participant

    +1 for more additional Matrix outputs.

    I would even be fine with having an option that takes 3 of the other busses and turns them into additional Matrix outputs…….

    #87380
    Profile photo of woutersnoei
    woutersnoei
    Participant

    +1 for more matrix buses, even if it’s *one* more that’s already very welcome..

    cheers & thanks,
    Wouter

    #87382
    Profile photo of L
    L
    Participant

    when in mono matrix it would be nice to have 6 separate fader controlled outs instead of 3.

    #87386
    Profile photo of Edwin
    Edwin
    Participant

    Hello everybody,

    6 mono matrix buses instead of 3 mono matrix busus would be very usefull.
    It would be very great to have the possibility to change the bus config in aux, group or matrix.
    So combine the 3 stereo matrix mix buses with the 12 aux/group mixbuses and get in total of 15 mixbuses wich you can change in the mix bus you need.

    #87705
    Profile photo of MRBaum
    MRBaum
    Participant

    +1

    Yes, it would be helpful to have more / 6 Mono Matrix Bus, that could optionale be paired to 3 stereo ones like with the input channels.

    #87739
    Profile photo of paullorenz
    paullorenz
    Participant

    +1

    On dlive I often need way more than 8…

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.