Make Mono mixes into stereo mixes

Forums Forums Qu Forums Qu general discussions Make Mono mixes into stereo mixes

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of MarkPAman MarkPAman 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #97386
    Profile photo of john
    john
    Participant

    We are a fully digital band and run multiple instruments in stereo. I uas a qu-pac and want two additional stereo mixes for IEMs. Is there a way to make monomix 1 and 2 into a stereo mix?

    #97399
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi John,

    The mono mixes 1-4 are fixed as mono on Qu, but you could add a dSnake expander and make use of the 4 stereo groups which are switchable to mixes.

    The dSnake expander will allow you to patch the groups to output sockets, which aren’t available locally on the Qu-Pac.

    Thanks!
    Alex

    #97407
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Without a dSnake expander, you also have one more stereo output available from the Alt Out (TRS) sockets, which can be set up as any mix output. So if you change a group into a mix that can be routed there.

    Then, if you’re a band mixing from stage, you could PAFL a second group, changed to a mix & use the headphone out. Probably best that the person who controls the desk uses this one to avoid unexpected changes though!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.