Main mix to tie lines

Forums Forums SQ Forums SQ general discussions Main mix to tie lines

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Swell Swell 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #84415
    Profile photo of Kbshearer
    Kbshearer
    Participant

    Hello,

    I’m trying to route the main mix of an SQ7 over tie lines to an SQ6. I only see a way to route console inputs, either local or from the SL Link to the tie lines. is there a way to do this?

    Thanks!

    #84416
    Profile photo of Mfk0815
    Mfk0815
    Participant

    You connect the two SQ via SLink, route on the SQ7 the main mix to SLink outputs, which will be SLink inputs on the SQ6. On the SQ6 you can route this SLink inputs to local outputs via tielines.

    #84662
    Profile photo of Swell
    Swell
    Participant

    Yes it can be done. Connect both mixers with SLink Ports.

    Then go to your IO Page and patch the LR Mix of SQ7 to the SLink SQ6 of your choice. For Example Slink 11+12. Now your Main LR on the SQ7 is outputing on your SQ6 11/12

    https://www.allen-heath.com/media/SLinkConnections_V1_4_0.pdf

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.