M-MMO Card Aviom Setup

Forums › Forums › iLive Forums › iLive general discussions › M-MMO Card Aviom Setup

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Underscore Underscore 6 years, 9 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2017/07/12 at 5:03 pm #64270
    Profile photo of brandon
    brandon
    Participant

    Hello, I have a T112 with an IDR48 fitted with an M-MMO Card in the port b slot of the IDR. I’m trying to get the M-MMO Card setup up to feed an Aviom system but can’t figure out the routing in the outputs screen. The card is showing up but I can’t figure out how to feed the card direct outs and a couple of aux sends. Thanks

    2017/07/13 at 1:52 am #64279
    Profile photo of Underscore
    Underscore
    Participant

    Are you at the Mixrack setup screen. There is a tab for the MMO output card(select it).
    On the MMO routing screen you have to select the Aviom port. Once that is selected, for each channel you have to select the “output source” be it a Input-Direct out for an input channel, or an aux send, a matrix, mains, etc…. then the specific channel of the source.
    Make sure to “apply” the changes or they won’t take effect.

    2017/07/13 at 5:23 pm #64288
    Profile photo of brandon
    brandon
    Participant

    Got it. Thanks

    2017/07/15 at 10:33 pm #64297
    Profile photo of Underscore
    Underscore
    Participant

    I wasn’t totally correct, from the “outputs” screen is the tab for the port-B option card where you will assign the outputs.

    Sent from my SCH-R970 using Tapatalk

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.