m-dante for second mix

Forums › Forums › iLive Forums › iLive general discussions › m-dante for second mix

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 6 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2017/10/05 at 12:26 pm #65552
    Profile photo of blajko
    blajko
    Participant

    Hello, I have ilive r72, iDR 32 and m-dante. I’ll use the dante card to make a second mix for broadcast. I have also PC, Pro Tolls and m-audio profire 2626 sound card.

    My question is, will I be able to make my mix on my computer,make multitrack recording and send back to ilive the mixed signal. And at the same time listen to the signal on my Yamaha ns10 monitors through the m-audio card or I will have to run the cable from the aux out on iDR to my monitors?

    2017/10/07 at 6:48 am #65585
    Profile photo of ddff_lv
    ddff_lv
    Participant

    As long as your computer is able to do mixing and recording at once I don’t see any trouble. Keep in mind quite a big latency, but for the broadcast it doesn’t matter. For the M-audio card you’ll have to use Dante VIA to route signal.

    ddff

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.