LR processing

Forums › Forums › Qu Forums › Qu general discussions › LR processing

Tagged: , ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2014/09/14 at 8:01 pm #41634
    Profile photo of dmarindmarin
    Participant

    Hi

    Can i add a limiter in my master (LR) channel (Qu16), in order output do not exceed 0 db?

    The reason is that i have powered speakers and i want protection.

    Thanks

    2014/09/14 at 8:08 pm #41635
    Profile photo of GCumbeeGCumbee
    Participant

    Turn on the compressor on the main out and set ratio high. Adjust threshold for peaks.

    2014/09/14 at 8:11 pm #41636
    Profile photo of dmarindmarin
    Participant

    Thank you GCumbee

    I suppose ratio goes to infinity? And the threshold top is 0 db?

    2014/09/14 at 10:06 pm #41641
    Profile photo of GCumbeeGCumbee
    Participant

    Yes. Set to INF. Normally limiting is way up like 20:1 but they only go to 10:1.
    I would set the drop down to MANUAL PEAK.
    Set the threshold to where you are getting some reduction on loudest peaks or the music or vocals. Just hitting the tops. But will reduce more if there is a sudden burst of something. Hopefully.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.