Lost FX send bus 1

Forums Forums dLive Forums dLive troubleshooting Lost FX send bus 1

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of gigman71 gigman71 2 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #78193
    Profile photo of gigman71
    gigman71
    Participant

    Programming up for a show and FX send 1 has vanished. It is there and still labelled in the strip assign window but is labelled not assigned in the FX window. It was assigned to a strip but dissappeared while assigning comps on input channels and I cant get it back. I can assign anything else to the same strip but cannot assign the bus anywhere. 8 sends are selected. I have rebooted and still missing.

    #78352
    Profile photo of SteffenR
    SteffenR
    Participant

    maybe you switched the FX 1 to Insert?

    #78353
    Profile photo of DavidCo
    DavidCo
    Participant

    Check the back panel of FX1. Almost certainly either set as an insert or unassigned.

    DC

    #78476
    Profile photo of gigman71
    gigman71
    Participant

    Yea cheers, I did find it. Not sure why it was unassigned as I had tested it then gone onto placing comps etc, must’ve bumped something in the I/O window

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.