logic interface for virtual sound check

Forums Forums Qu Forums Qu general discussions logic interface for virtual sound check

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of Mike C Mike C 2 months, 1 week ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #90564
    Profile photo of hopcazz
    hopcazz
    Participant

    Hi all
    i have a QU16 and logic i got it set up to so that logic can record from the desk fine but realistically i would like to route the channels back to their designated inputs to be able to do a virtual sound check and ive becom stuck on how to do this is it possible??

    thanks in advance
    carwyn

    #90565
    Profile photo of volounteer
    volounteer
    Participant

    @hopcazz

    how many channels
    how are they recorded? usb qu drive other output(s)

    cant do it in real time
    but you should be able to play the recording back via usb or qudrive
    just not send it to the original inputs

    #90566
    Profile photo of hopcazz
    hopcazz
    Participant

    hi ive recorded it through usb b to logic and just want to direct them back to the original channels i know you can do it on the qu drive but trying to work it out on logic

    thank you
    carwyn

    #90567
    Profile photo of Steffen R
    Steffen R
    Participant

    maybe you should ask this in a Logic forum?

    configure logic so that it sends every recorded chanel unmixed to an output

    #90572
    Profile photo of volounteer
    volounteer
    Participant

    @SteffenR

    sounded like a Qu problem to me that he is asking about
    I presume he knows how to play back from Logic

    #90575
    Profile photo of Mike C
    Mike C
    Participant

    i have a QU16 and logic i got it set up to so that logic can record from the desk fine but realistically i would like to route the channels back to their designated inputs to be able to do a virtual sound check and ive becom stuck on how to do this is it possible??

    You need to go into the pre amp source menu and set the channel inputs to USB.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.