Linking/expanding Qu mixers

Forums Forums Qu Forums Qu general discussions Linking/expanding Qu mixers

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of titoen titoen 5 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #83705
    Profile photo of John

    This might be a silly question but here goes. Is it possible to link a Qu-Pac and a Qu-SB using dSnake/etherCon in order to use the additional SB inputs/pre-amps instead of buying the more expensive AB168?

    I use my Qu-Pac for my band and for occasionally doing sound for other bands, I probably use it about twice a month. I have occasionally wished I had another couple of channels, and also occasionally think I should carry a spare mixer to important gigs. Having a Qu-SB as a spare mixer would suit me fine, and would be particularly welcome if it could expand my Qu-Pac to 32 channels.

    Profile photo of Lee7


    Afraid not due to the QU’s design.

    Profile photo of titoen

    Cannot link them like a stagebox. But you could do the old Analog method of the LR of one of the mixers be Inputs 1 and 2 of the other mixer. Would have two different consoles to work with but you get your expanded IO. Best would be 2 iPads one for each and go from there.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.