Ist this normal? Has anybody seen this?

Forums › Forums › dLive Forums › dLive General Discussions › Ist this normal? Has anybody seen this?

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Scott Scott 2 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2022/02/25 at 1:50 pm #106200
    Profile photo of pinkpanter
    pinkpanter
    Participant

    Ist this normal? Has anybody seen this?

    Firmware 1.93 multisurface setup, DM48, Giga Ace
    Both surfaces are powered up and working.

    PAul

    P.S.
    Picture attached

    Attachments:
    You must be logged in to view attached files.
    2022/02/26 at 11:50 am #106206
    Profile photo of Scott
    Scott
    Participant

    Tap on the error messages, and you can get to where you can clear them. They most likely won’t come back, unless there is a persistent problem. This probably happened during the reboots while the firmware update was taking place.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.