Issue with peq on the left screen

Forums › Forums › Avantis Forums › Avantis troubleshooting › Issue with peq on the left screen

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of jyradelix jyradelix 2 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2021/11/21 at 9:40 pm #104547
    Profile photo of Florian Steppke
    Florian Steppke
    Participant

    Today i had a strange issue with the peq on the left screen. Every time i tried to grab a frequency i always changed the first band. It did not matter which band i tried to change, always the first band jumped to the finger. By selecting the frequency under the curve and using the touch and turn everything was working. On the right screen everything worked as expected. After a sceen recall the issue was gone. V1.11

    2021/11/23 at 6:50 am #104564
    Profile photo of jyradelix
    jyradelix
    Participant

    I can confirm that I saw the same issue on mine. V1.11 as well. In fact, if I remember correctly I could replicate the behavior not only with the touchscreen but with Avantis Director connected to the board as well. I’ve not seen the issue since that one time.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.