Is it possible to update the firmware without QuDrive ?

Forums Forums Qu Forums Qu general discussions Is it possible to update the firmware without QuDrive ?

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of volounteer volounteer 3 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #100201
    Profile photo of danieldlds
    danieldlds
    Participant

    Hi,

    I don’t have any usb device that meets the strict requirements of the QU-drive on the QU-16 that I have. Is there any other way of updating the firmware ?

    Thanks,
    Regards

    #100202
    Profile photo of Mike C
    Mike C
    Participant

    None that I know of.

    The Kingston Data Traveler series work perfect.

    Our local Fed Ex Office store sells them and the big A on line
    store has them.
    Data Traveler

    #100203
    Profile photo of volounteer
    volounteer
    Participant

    @danieldlds

    you dont need to meet the official ‘requirements’
    what you need is to insert a usb drive and have them actually recognize it and format it
    then use that one whatever the specs said

    NOTE
    MOST of the kingston data travellers work BUT not ALL of them

    However they are by far your best bet these days
    you should try some of those before buying others

    unless you can find an old usb2 drive somewhere, which is how I found the first one that we could use
    later I did find a KDT that worked so now we have a spare/backup memory stick

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.