IPAD MIXING

Forums › Forums › Qu Forums › Qu troubleshooting › IPAD MIXING

Tagged: , ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2016/03/17 at 8:56 am #54611
    Profile photo of Scotty BoyScotty Boy
    Participant

    Hello,

    Im very new to working with digital mixers and was wondering if it was possible to control the mixer from my iPad without it being connected vie ethernet cable.

    Any suggestions to work around this would be a huge help!!
    Thank you
    Scott

    2016/03/17 at 1:01 pm #54614
    Profile photo of GCumbeeGCumbee
    Participant

    You cannot directly connect via Ethernet anyway. There has to be a wifi router connected via Ethernet to the network port on the console. Then you select that router in your wifi menu of the iPad. Then you can connect to and mix running the current app to match the current firmware. If you are just getting the app then you will have to make sure your console has that version or later firmware. Apps are not backward compatible. Meaning 1.80 of the app will not work with say 1.73 or lower number firmware.

    Hope that explains it.

    2016/03/18 at 7:41 am #54633
    Profile photo of Scotty BoyScotty Boy
    Participant

    Ahh right okay, ill give that a try today!

    thanks mate

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.