Topic: Ip8 over WAN | Allen & Heath Digital Community

Ip8 over WAN

Tagged: WAN IP8

This topic has 1 reply, 2 voices, and was last updated 4 years, 10 months ago by SteffenR.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
2020/01/08 at 8:15 am #88623

Anonymous
Inactive

Dear All

I have a little troubleshooting with an IP8 and DM0

When I use both on lan, we have no insue
But over Wan (10 to 15ms latency) the IP8 connect and disconnect every time.

The port use to connect the DM0 to IP8 are TCP-UDP 51320-51325.

Do you know if it’s necesary to open other port, or the latecy need to use IP8 over Wan

Resources
https://support.allen-heath.com/Knowledgebase/Article/View/1181
https://www.allen-heath.com/media/IP8-Getting-Started-Guide-AP10354-Issue-1.pdf

https://www.acaudio.co.uk/images/products/large/ALIP8.png

Best Regards
Damien

2020/01/14 at 2:45 pm #88720

SteffenR
Participant

did you mean Wide area network or wireless LAN?

It is not recommended to open the network to the internet… (WAN)
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.