Ip Direct Out patch point

Forums › Forums › dLive Forums › dLive feature suggestions › Ip Direct Out patch point

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 7 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016/08/21 at 4:32 pm #57758
    Profile photo of CLA
    CLA
    Participant

    I really need to be able to select different direct out patch points for different outputs. For example, I want my direct outs to be post channel processing for my ME system sends. However, for my Dante card for recording, I need them to be pre channel processing. Is this something that will be possible soon?

    2016/08/22 at 7:19 am #57762
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi CLA,
    I typically recommend patching the socket inputs (dSNAKE 1-X) direct to the I/O Port for recording, these are the signals straight after the preamp (pre digital trim). It would allow you to select the desired pick up point for the Input Direct Outs to the ME.
    Hope this helps.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.