I/O scrolling in Director (Mac)

Forums Forums dLive Forums dLive General Discussions I/O scrolling in Director (Mac)

This topic contains 9 replies, has 5 voices, and was last updated by Profile photo of SteffenR SteffenR 6 years, 7 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #64867
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Is it just me or I/O navigation via Director is extremely inconvenient? Everytime I want to scroll right and bit down to follow the diagonal, I jump to top right or some other undesirable destination. Arrows on keyboard are not working in that area as well.
    It takes forever to patch or even read the patch…

    ddff

    #64873
    Profile photo of BILDIC
    BILDIC
    Participant

    In windowed mode and win10 (2 touchscren) is some big problem with scrooliong and finding position for patch.

    I meant – it is resolution problem ( i use 1920×1080)

    #64877
    Profile photo of SteffenR
    SteffenR
    Participant

    wich Version?
    1.50 had a problem with the resolution

    #64878
    Profile photo of BILDIC
    BILDIC
    Participant

    1.51

    For patching i must switch windowed mode off, then it have better patching

    When i touch screen with finger it didnt work and i had to use trackball.

    After, windowed mode again on

    PC is NUC i7, 2x touch screen Dell S2240T

    #64879
    Profile photo of BILDIC
    BILDIC
    Participant

    In ver 1.50 i had another resolution problem:

    Dlive Director 1.5 windowed mode – I/O window

    In 1.51 is this resolved

    #64885
    Profile photo of Lishinsky
    Lishinsky
    Participant

    On 1.51 for mac you can not zoom out the I/O page, only zoom in. the only way to zoom out is to restart the program.

    #64887
    Profile photo of SteffenR
    SteffenR
    Participant

    on Win10 the “-” button doesn’t work as well, but mouse wheel does it…

    #64894
    Profile photo of K08
    K08
    Participant

    Yeh I have the same issue. I was in 1.50 and is still in 1.51.

    #64910
    Profile photo of BILDIC
    BILDIC
    Participant

    I have provisionally solution – with the mouse roll wheel only zoom in/out (not click and drag), with the finger moving screen for position and then double tap with finger on screen or click with mouse to patch/unpatch.

    #64914
    Profile photo of SteffenR
    SteffenR
    Participant

    nah still a bug…

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.