InstaSnake PA200 Series with Qu Pac?

Forums Forums Qu Forums Qu general discussions InstaSnake PA200 Series with Qu Pac?

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 7 years, 8 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #57037
    Profile photo of Jimmi V
    Jimmi V
    Participant

    Hello all, I’m looking to add a few more channels to my QuPac. Does any one have any experiences with InstaSnake PA200 Series? Does it work like A&H AB168 Floor Box? There’s a 4 channel PA202F model and my plan is to hook it up from the QuPac dSnake to the PA202F box to get that additional 4 channels, will that work?
    https://www.etslan.com/products.cgi?cat=1
    https://www.fullcompass.com/prod/190755-ETS-PA202F

    #57039
    Profile photo of Andreas
    Andreas
    Moderator

    The InstaSnake is just a passive, analogue cable adapter to run a couple of symmetric analog lines through pairs of twisted cables.
    Not comparable at all to the digital dSnake.
    Or: No, this does not work.

    #57040
    Profile photo of Jimmi V
    Jimmi V
    Participant

    Darn, I was hoping it would. Thank you very much Andreas.

    #57044
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    dSnake needs dSnake – there is nothing else that will work.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.