Input Metering not possible Post Fader

Forums Forums iLive Forums iLive general discussions Input Metering not possible Post Fader

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mark Oakley Mark Oakley 8 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48666
    Profile photo of Paul
    Paul
    Participant

    Why isn’t it possible to select input metering on a post fader position.(Thanks for all the pre-fader options in 1.9 ) This is very useful in show mode if you have to balance lot of choir mics or string mics. You easily see on the metering which members are singing or playing softer and balance out those differences. It also helps if channels are muted so you are not disturbed by off scene mics. I used this a lot on other desks . Even if we won’t get a release on live please consider it in dLive development fine tuning or on the GLD range where it is also not implemented.

    #48670
    Profile photo of Mark Oakley
    Mark Oakley
    Participant

    This is a feature I used a lot on my old Roland VM board (2001 technology!) and miss on the iLive.

    -Mark

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.