Input issues on AB168

Forums Forums Qu Forums Qu troubleshooting Input issues on AB168

Tagged: 

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 4 years, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #86824
    Profile photo of Tim
    Tim
    Participant

    Hi,
    So I’ve come across a rather odd issue and I don’t know how to proceed and try and fix it, and was hoping to get some advice.

    I’ve got a Qu-16 connected to an AB168 stage-box, and it works just fine except for inputs 14 and 15. We’ve can’t seem to get any signal from those channels to the mixer. I’m unsure if this is a config issue or a hardware issue (hoping it’s the former), and don’t know how to test/fix from here. The channels are all routed normally to the board (so no input 15 sends to channel 18 or anything), and inputs directly into the back of the Qu16 work just fine. We’ve also double checked that it’s not the microphone, as audio will come through other channels just fine.

    Any advice you might have would be greatly appreciated.
    Thanks!

    #86825
    Profile photo of garyh
    garyh
    Participant

    Double check the channel 14 & 15 source settings (dSnake, local, USB).

    #86917
    Profile photo of Tim
    Tim
    Participant

    They all seem to be being sent to the board (the 14/16 swap isn’t related)

    #86918
    Profile photo of Tim
    Tim
    Participant

    Image failed to upload for some reason and it won’t let me edit it in.

    Attachments:
    You must be logged in to view attached files.
    #86933
    Profile photo of SteffenR
    SteffenR
    Participant

    In the preamp settings under processing what does the source say?

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.