Individual GEQ for master L and R.

Forums Forums GLD Forums GLD feature suggestions Individual GEQ for master L and R.

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of GCumbee GCumbee 7 years, 9 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #35329
    Profile photo of zas5799
    zas5799
    Participant

    I want to set different GEQ between each master channels.
    Have any way to do it?

    #35334
    Profile photo of GSLC-Tech
    GSLC-Tech
    Participant

    Might be an odd way of doing it, but assign all channels to two different groups, eq the groups, pan one right and the other left and send both groups to the mains.

    #35379
    Profile photo of antonyja
    antonyja
    Participant

    Since V1.3 it has been possible to source mix ext-ins from the outputs of other mix channels, so an easier way to achieve separate GEQs is to use 2 mono matrix and source the ext-ins of these from Main L, and Main R.

    Antony

    Software Manager
    Allen and Heath

    #35387
    Profile photo of GCumbee
    GCumbee
    Participant

    Along these lines, is there a way to get a GEQ on the IEM/WEDGE busses? So far I don’t not see a way to do it. I want to separately EQ the outputs of those for example for control room speaker feed so as to tune the speakers to the room.

Viewing 4 posts - 1 through 4 (of 4 total)

The forum ‘GLD feature suggestions’ is closed to new topics and replies.