Indipendent controls on mixpad… it is possibile?

Forums › Forums › SQ Forums › SQ general discussions › Indipendent controls on mixpad… it is possibile?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of crusty76 crusty76 3 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2020/09/20 at 1:37 pm #95081
    Profile photo of crusty76
    crusty76
    Participant

    Hi! Yesterday i had the first live show with my new SQ6. A serious problem i’ve encountered is the impossibility to separate functions on the console and mixpad to do indipendent works ( Console FOH – Mixpad AUXES). Every time the FOH Engineer change layer, Select Busses, Matrix, etc. the Mixpad follow the Console changing the scenario for the STAGE Engineer. Is it possible to do separate controls? I’ve Tried to block different user options FROM the Console to ipad But it seems DON’T work. Any help is much apreciated. Thanks.

    2020/09/20 at 1:50 pm #95082
    Profile photo of conrad
    conrad
    Participant

    Switch off Follow SQ Channel & Mix Select options in Mixpad setup.

    2020/09/20 at 6:47 pm #95096
    Profile photo of crusty76
    crusty76
    Participant

    Thank you very much! 🙏🏻

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.