Immersive audio

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Kestutis NO NOISE Kestutis NO NOISE 2 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #106490
    Profile photo of Kestutis NO NOISE
    Kestutis NO NOISE
    Participant

    Hi all. I would like to use Avantis with Immersive audio, but I see one big problem. Avantis direct out signal doesn’t listens to VCA. Without this feature it’s impossible to work in Immersive audio. In my opinion this should be fixed-updated, signal path in follow fader mode should listen to VCA as well.

    #106491
    Profile photo of Scott
    Scott
    Participant

    Do you have your global direct-out point set as “post delay”?

    #106492
    Profile photo of Kestutis NO NOISE
    Kestutis NO NOISE
    Participant

    Sure. As I mentioned before, it listens to channel fader, and if this channel is assigned to VCA – nothing changes. You can play with VCA – nothing.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.