iLIVE AES and Dual Rack Option

Forums Forums iLive Forums iLive general discussions iLIVE AES and Dual Rack Option

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 6 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #47266
    Profile photo of akki
    akki
    Participant

    I have Few of Doubt.

    1. Each AES consume how Many Fader ( IF AES Have Left/Right Signals so it consume 1 or 2 faders)
    2. IF AES have Stereo Signals can we separate it (Into L/R)
    3. We have Four Setup with independent surface and IDR (modular) so in certain occasion client want to merge two setup together can it be possible.

    #47268
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi akki,

    1. You can assign AES inputs to either a Stereo Input Channel (1 fader) or two Mono Input Channels (2 faders). I’d suggest you download the free iLive Editor software and spend some time familiarizing with the system.
    2. Yes, again, you can independently assign the L and R side of an AES input to two Mono Input Channels.
    3. You can share audio across multiple systems if they are equipped with the same option card e.g. Dante, ACE, MADI. You can also combine two iDR MixRacks together with one Surface to build a larger system with up to 128 Input Channels. Have a look at the Understanding Dual Rack doc on our website for the details.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.